785.862.2060 | 800.255.2302 sales@adapausa.com




This unique tool enables you to tie the hanger wires to the bar joist at the same time and with the same scaffolding height used for hanging grid.  Cut a handle of ½” conduit to desired length…slip the Wire Twister on, then drill and fasten it with a pop rivet.  Bend the other end into a crank handle (see sketch).  To use the Wire Twister, bend the wire (as shown in fig. 1) and hook it over the bar joist.  Then insert both ends of the wire into the large opening of the Wire Twister and turn the crank (fig. 2).  The wire will twist tightly.  Alternate direction of the Wire Twister to release it.